Transmission fluid oil exchanger NORDBERG CMA35S
The Nordberg CMA35S automatic unit is designed for complete oil changes of automatic transmissions in a short period of time with minimal operator involvement.
Maximum oil change accuracy is ensured by the fact that the oil is changed not by volume, but by weight using built-in high-precision scales. This allows not to control different performance of automatic transmission pumps, temperature difference between old and new oil, and completely eliminates the violation of oil change technology and human factor. After the oil change, the service life of the automatic transmission is extended.
The set includes a large number of adapters for different brands of modern cars - for automatic transmissions and CVT (variator), such as Jatco, Aisin, ZF, GM and others
- Automatic detection of fluid flow direction.
- Automatic replacement of old transmission fluid with new fluid (ratio over 90%)
- Oil pressure and internal machine pressure displayed on LCD (automatic control) up to 3 l/min.
- Oil drain function
- Oil refill function – in manual and automatic modes with 0.1 liter refill increments.
- Possibility of refilling while the car engine is running
- New fluid can be drawn from any external container.
- Indication of the volume of the replaced fluid in the automatic transmission
- Automatic switching to the safe for automatic transmission mode “RING”, if the liquid in the external container has run out.
- Monitoring of quality and speed of fluid flow by indicators
- Electronic system of oil weight control during oil change
- Drain tank 25 liters
- Electronic pump
Absolute filling accuracy
Control by weight makes it possible to fill the regulated amount of oil as accurately as possible. Accuracy during filling is the most important point, because in case of overfilling or underfilling the automatic transmission can be damaged during further use.
Complete safety
The outgoing and incoming flow are automatically equalized and this protects the operator from error. The unit will not allow the replacement process to begin if there is no new oil in the fill tank.
Automatic transmission cleaning function
The CMA35S allows the CMA35S to gently scrub the deposits built up over a long period of use in high-mileage vehicles, preventing rapid filter clogging and automatic transmission oil starvation.
Control and indication
- Level gauge for fresh oil
- Level gauge for used oil
- Cancel button
- Button to return to the previous line or increase the parameter value.
- Button to go to the next line or decrease parameter values.
- Button for entering commands and saving parameter values.
- Oil outlet pressure gauge
- Inlet pressure gauge
- Used oil tank level gauge
- Level gauge scale
- Level indicator in the new oil reservoir
- Connector for connection to the automatic transmission (oil inlet and outlet)
- Anti-slip and anti-dump valve
- Oil drain valve
Reviews
Clear filtersThere are no reviews yet.