COLLISION REPAIR BENCH NORDBERG BAS13
NORDBERG BAS13 is a platform for restoration of the geometry of passenger cars and SUVs, which allows you to perform any bodywork quickly and efficiently. The monolithic frame design allows rigid fixation of the body.
Lengthened version of the platform + 400 mm in one piece
Advantages
- The convenience of working with slipways of platform design consists in their complete independence from the foundation and the possibility of easy installation and movement at any time, which is especially important for rented premises.
- The design of the body geometry alignment bench is based on the most advanced technology and takes into account all the advantages and disadvantages of the most famous brands of staple carpenters. Strength, precision, practicality and safety – that’s the Nordberg principle.
- The building block platform is made of a high-strength steel profile. Along the whole platform there are two rows of slots for fixing the fixing legs, thanks to which it is possible to fix the body of any structure.The platform has projecting edges on the outer and inner sides, which serve as rail supports for the power towers. The procedure of installing / removing the car is quick and easy. The staple is equipped with a hydraulic tilt cylinder for entry. Also included are carts for rolling vehicles with locked wheels. Staple does not require alignment of the vehicle with respect to the axis of the frame, which greatly reduces installation time and maximizes the rationality of the working space on it.
- Two powerful power towers with a tractive force of 10 tons each and with easy to fix anchors that allow quickly and efficiently apply forces in different directions, make it possible to work with any part of the body in any plane. A full 360º rotation can provide any angle of application of force. No dead spots in the stack. Included is a boom to direct the pulling force upward.
- The power towers are equipped with powerful and reliable hydraulics controlled by pneumohydraulic pedals and equipped with rollers located directly on the platform. The towers slide effortlessly along the perimeter of the stand on guide rails and are fixed at any point, including the corners of the building.
- A set of fixing clamps quickly and reliably fixes almost any vehicle.
- The set of tools and accessories provided with the machine makes it possible to carry out all types of work.
Accessories
- high-strength steel platform with load-carrying capacity of 3 tons
- 2 floor supports, one of which has a hydraulic drive for folding and raising the base with the car horizontally, with locking system
- Set of four clamps for fixing the car by the flanging of the body. The clamp locks easily into position on the platform. Jaws of the clamp can rotate around their axis
- Two access ramps
- Tower with 10 ton hydraulic cylinder - 2 pcs. Once the tower has been positioned, it can be easily moved on rollers around the platform and locked in place. The power system with a hydraulic cylinder inside the tower pulls the chain through the blocks, which allows easy adjustment of the direction and height of the pull. The amount of pulling force is independent of the pulling point. The direction of the chain tension and the pulling force remain unchanged during the straightening process
- Roof dressing arm - 1 pc
- Mobile perforated cart stand with body tool – 1 pc.
- Rack dressing kit – 1 pc.
- Clamp with a bracket for transverse straightening – 1 pc.
- Main clamp – 1 pc.
- Main clamp – 1 pc.
- Clamping by the edge of the part, by the flanging. For fastening in narrow sections – 1 pc.
- Gripper – 1 pc.
- Reinforced clamp, hinged – 1 pc.
- Clamp, reinforced with a bracket for transversal straightening – 1 pc.
- Edge bender – 1 pc,
- Socket wrench – 1 pc,
- Exhaust strip with holes – 1 pc.
- Large clamp – 1 pc.
- Large stop for the gripper No. 13 – 1 pc.
- Hinge – 1 pc.
- Chain retainer – 1 pc.
- Chain clamp – 1 pc.
18. Chain splitter – 1 pc.
19. Bolt clamp – 1 pc.
20. Washer set
21. Set of wheel stands – 2 pcs.
22. Bowl cable synthetic – 1 pc.
23.Stopper – 1 pc.
24. Small steel cable – 1 pc,
25. Bowl steel cable – 1 pc,
26. Tubing – 1 pc.
27. Fixing bolt to the frame of the slipway – 4 pcs.
28. Wheel cart – 2 pcs.
29. Chain with hook (size\ length) – 2 pcs.
30. Chain, reinforced with a hook (size\. Length: 3,5 m) – 2 pcs.
31. Pneumohydraulic pump, 700 bar, tank capacity 1600 ml, no-load delivery (0 bar) 810 ml/min, under-load delivery (700 bar) 180 ml/min – 2 pcs.
Reviews
Clear filtersThere are no reviews yet.