Pocket Brake Fluid Tester NORDBERG NTC9001

A quick and easy way to check the moisture content of the brake fluid. The results are displayed in seconds.

Advantages

• Robust construction: The tester has been significantly improved
• Widely used: DOT3, DOT4, dot5 brake fluid testing

LED indicator light

• Green LED lights = water content in brake fluid H2O <1.5%, brake fluid is certified.
• Yellow LED indicator = water content in brake fluid H2O = 1.5–3%, can be continued to use, repeat the test after six months.
• Red LED lights = water content in brake fluid H2O> 3%, cannot continue to use brake fluid needs to be replaced
• Red LED: Brake fluid replacement
• Red LED flashes: Replacement
• LED yellow: low moisture content, check again after six months
• Green LED: brake fluid lines / row of cells

How to use

• Step 1. Turn on the brake fluid tester by pressing the button. The green light should turn on. If the indicator does not light up, it may be time to change the battery.
• Step 2. Unscrew the cover of the brake fluid reservoir and remove the cap for the brake fluid stand.
• Step 3. Dip the test probes into the brake fluid, and the LED indicators will indicate the percentage of water in the brake fluid.
• Step 4. After testing, do not forget to screw the brake fluid reservoir cap tightly.
• Step 5. The tester will turn off automatically after 12 seconds of inactivity.