FORCE 903T1 CV Boot Installer Tool

FORCE 903T1 CV Boot Installer Tool

• Squeeze the arm of the installer and place the large end of the boot over. Press in the small end of the boot. Spray the surface of cone & boot with lubricant.
• Place the cone on the ground and center the boot over the cone.
• Holding the boot to the installer use a firm and fluent motion to press the boot to the base of the cone.
• Place the installer & cone over the joint. Drive the boot over the joint by striking the base of the installer and greasing the joint. And don’t stretch over the joint until a tight fit is formed.